JIS SWCH 10K |
JIS G3539 |
Cold heading and cold forged carbon steel wire |
PN 1.0117 |
PN EN 10025-2 |
Hot rolled structural steel products - Part 2: Technical delivery conditions for non-alloy structural steels. |
NBN 1.1179 |
NBN EN 10083-1 |
Quenched and tempered steel - Part 1: General delivery technical conditions |
DIN 1.0545 |
DIN EN 10025-3 |
Hot rolled structural steel products - Part 3: Technical specifications for the delivery of normal-welded, normal-welded, fine-grained structural steel. |
SNV 41 CrS 4 |
SN EN 10083-1 |
Quenched and tempered steel - Part 1: General delivery technical conditions |
SR 19 MnB 4 |
SR EN 10269 |
steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
SS EN-JM1030 |
SS EN 1562 |
Casting - Ma Steel Cast Iron |
SR EN-JM1140 |
SR EN 1562 |
Casting - Ma Steel Cast Iron |
EN 1.0529 + ZF |
EN 10147 |
Continuous hot-galvanized low carbon steel strip and steel sheet - transportation technical conditions |
ASTM A240 S41008 |
ASTM A240/A240M |
Heat-resistant chrome and chrome-nickel stainless steel sheets, sheets and strips for pressure vessels |
NF E 35 3 2Ni |
NF EN 499 |
Welding consumables - manual arc welding of non-alloy and fine grain steel covering the electrodes |
CSN W 16 8 2 |
CSN EN ISO 14343 |
Welding consumables - electrode wire, strip electrode, wire and welded rod of fused stainless steel and heat resistant steel - Classification |
PN GX40NiCrSiNb35-18 |
PN EN 10295 |
Heat resistant steel castings |
SS S 550 GD + Z |
SS EN 10326 |
Continuous hot dip-plated structural steel and strip - technical delivery conditions |
SS 1.0531 + Z |
SS EN 10326 |
Continuous hot dip-plated structural steel and strip - technical delivery conditions |
BDS DX 51 D + AZ |
BDS EN 10327 |
Technical delivery conditions - continuous hot dip coating strip and sheet, low carbon steel, cold forming |
ISO X18CrMnMoNbVN12 |
ISO 15510 |
Stainless steels -- Chemical composition |
MSZ 1.3339 |
MSZ EN ISO 4957 |
Tool steel |
SFS 1.6359 |
SFS EN 3528 |
Aerospace Series - Steel X2nicomo18-8-5 (1.6359) - Vacuum Induction Melted And Vacuum Arc Remelted - Solution Treated And Precipitation Treated - Bar - A Or D <= 150 Mm - 1750 Mpa <= R[M] <= 2000 Mpa |
SNV Class 45H |
SN EN ISO 898-5 |
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: s. |